Determination of copper in medicinal plants used as dietary supplements by atomic absorption spectrometry with direct flame solid analysis

An alternative device for the direct solid analysis (DSA) for copper determination by flame atomic absorption spectrometry (FAAS) is proposed. Copper was directly determined in commercial medicinal plants used as dietary supplements. The determination of copper in solid samples by DSA–FAAS was made by using a conventional air–acetylene flame. Between 0.05 and 1.5 mg of each test, sample was weighed directly into a small polyethylene vial connected to the device used for solid introduction into the flame. Test samples were introduced into the flame as a dry aerosol using a T-quartz cell set between the burner and the optical path. The T-quartz cell has a slit in the superior part by which the solid aerosol passes to the flame. A transient signal, evaluated as integrated absorbance, is produced and it is totally integrated in 2 s. Background signals always presented absorbance values less than 0.1. It was found a characteristic mass of 0.8 ng Cu and absolute limit of detection of 1.2 ng (3 s), or 1.2 μg g⁻¹ if a sample mass of 1 mg was used. Optimized conditions for air flow rate, flame stoichiometry, and so on were established as well. No excessive grinding of the samples was needed and samples with particle of size less than 80 μm were used throughout. No statistical difference between the results from the proposed system and those obtained by sample digestion and determination by conventional FAAS was observed. With the proposed procedure, more than 50 test samples can be analyzed in 1 h and it can be easily adapted to conventional spectrometers for FAAS.     

Synthesis of alpha-MoTe2 nanorods via annealing Te-seeded amorphous MoTe2 particles

Semiconductor alpha-MoTe2 nanorods have been synthesized by annealing Te-seeded particles of an amorphous MoTe2 intermediate. This intermediate is prepared by a solution reaction between Mo(CO)6 and elemental Te in diphenylmethane. The as-synthesized products were characterized by structural, compositional, and morphological techniques of X-ray diffraction, selected area electron diffraction, selected area energy dispersive spectroscopy, energy dispersive X-ray analysis, X-ray photoelectron spectroscopy, transmission electron microscopy, and high-resolution transmission electron microscopy. The results of the annealing process are MoTe2 nanorods with diameters of 50-200 nm and lengths ranging from 0.1 to 3.0 microm. Here, the rodlike structure of MoTe2 is reported for the first time, and added to the list as one kind of new morphology of MoTe2 nanomaterials. A mechanism for the formation of the nanorods is proposed. The sandwich-layered structure of Te-Mo-Te and the similarity in the structure between hexagonal alpha-MoTe2 and hexagonal Te are responsible for the formation of nanorods of MoTe2.     

Metal furnace heated by flame as a hydride atomizer for atomic absorption spectrometry: Sb determination in environmental and pharmaceutical samples

The present work describes a metallic hydride atomizer for atomic absorption spectrometry, by evaluating the performance of the Inconel 600^® tube. For this purpose, stibine was used as the model volatile compound and antimony determination in river and lake sediments and in pharmaceutical samples was carried out to assess the metal furnace performance. Some parameters are evaluated such as those referring to the generation and transport of the hydride (such as KBH₄ and acid concentrations, carrier gas flow rate, injected volume, etc.), as well as those referring to the metal furnace (such as tube hole area, flame composition, long-term stability, etc.). The method presents linear Sb concentration from 2 to 80 μg L⁻¹ range (r > 0.998; n = 3) and the analytical frequency of ca. 140 h⁻¹. The limit of detection (LOD) is 0.23 μg L⁻¹ and the precision, expressed as R.S.D., is less than 5% (40 μg L⁻¹; n = 10). The accuracy is evaluated through the reference materials, and the results are similar at 95% confidence level according to the t-test.     

A short access to the macrocyclic core of cycloviracin and glucolipsin

The macrocyclic core of cycloviracin and glucolipsin has been synthesised in ten steps from levoglucosan and (S)-(−)-dimethyl malate. The limited number of steps to obtain this macrolide makes it a valuable procedure for the synthesis of analogues of cycloviracin and glucolipsin.     

Synthesis of new isoxazoles derivatives attached to sugar moieties

This work reports the synthesis of isoxazoles linked to sugar derivatives in different positions of furanosidic rings, by intramolecular oxidative cyclization of α,β‐unsaturated oximes with iodine, potassium iodide and sodium hydrogen carbonate. These oximes were obtained from aldehyde‐sugar derivatives.     

Potentiometric, luminescence and NMR study of the interaction of Eu with glyceryl phosphates

Complexation of europium(III) with glyceryl-1- and -2-phosphates has been studied by metal ion luminescence, ¹H and ¹³C NMR spectroscopy and potentiometry. From the luminescence and NMR studies, the formation of a 1:1 inner-sphere complex, in which the glyceryl phosphate is directly bound to the metal, is confirmed. Similar apparent binding constants at pH 2 were obtained by the three methods. Values obtained by NMR at pH 2 are 53 M⁻¹ and 12 M⁻¹ for glyceryl-1- and -2-phosphate, respectively. By comparison with literature data on related systems it is suggested that the ligands bind through the phosphate group. To obtain structural information from the NMR data, complexation has also been studied with the lanthanide ions Dy(III), Er(III) and Gd(III) using both chemical shift and relaxation data. From this, metal-proton distance ratios have been calculated. Comparison of ¹H and ¹³C NMR spectral data in the presence of paramagnetic lanthanides suggests conformational equilibria in the solutions. From the potentiometric studies, global formation constants have been determined, and speciation diagrams obtained over the pH range 1.5pH7.0 for ligand/metal ratios of 1 and 30. Implications of these results on lanthanide induced fusion of phospholipid membranes are discussed.     

Synthesis of 3-alkyl-8-substituted- and 4-hydroxy-8-substituted-2,3,4,5-tetrahydro-1H-2-benzazepines

Based on the Schmidt reaction and an iodolactone ring expansion reaction, two different synthetic routes to substituted 2,3,4,5-tetrahydro-1H-2-benzazepines were developed. The Schmidt reaction on 2,3-dihydro-2H-1-naphthalenone ( 1 ) gave 3 , the product resulting from the alkyl group migration, as the major product instead of the tetrazole 2. This prompted the investigation of the Schmidt reaction on aromatic ketones 8 and 12. The product 9 due to alkyl group migration was the major product of the Schmidt reaction on 2-methyl-3,4-dihydro-2H-1-naphthalenone ( 8 ). The β-keto diester 12 gave a mixture of decarb-oxylated lactams after the Schmidt reaction. In this case, the lactam 13 resulting from the migration of the aromatic ring dominated over the other lactam 14. When lactam 14 was subjected to nitration, a single regioisomer was produced and transformed to the bromo alcohol 19. The other approach was based on the single pot ring expansion of the iodolactone 22 to the lactam 23 in the presence of methanolic ammonia. The iodolactone 22 was readily prepared from 2-allylbenzoic acid.     

The use of Tillandsia usneoides L. as bioindicator of air pollution in São Paulo, Brazil

Epiphytic bromeliadTillandsia usneoides was used as a biomonitor of metal atmospheric pollution in the city of São Paulo, Brazil. The samples were collected from an unpolluted area and were exposed for 8 weeks in 10 sites of the city and in a control site. The data obtained showed that the control site presented lower concentration for most elements analyzed and the highest concentrations of Na, Cl, Br, K. The highest concentrations of Zn, Cu and V were observed in stations submitted to industrial and vehicular sources. The results obtained for rare earth elements, Al, Fe, Mg, Mn, Rb and Sc indicate mineral dust origin. The elements Ba, As and Sb presented higher values in stations near streets with heavy traffic.